Below describes all application configuration settings for Cyan POD for Infor Distribution. If you would like more information or need these settings changed, please send an email to support@bluedotsolutions.com
There are two areas where settings are stored, POD-Config node in Manage Node (type POD_Config) and Manage Integrations. Changes to the POD-Config Node require a Re-Init sync on devices, changes to Integration settings will be applied when the next set file is imported into Cyan.
showTotalPackagesStop
Shows the package count on order summary screen 
Default Value: false
lineEditing
Gives the driver the ability to edit lines on a order/delivery
Default Value: false
reopenCompletedStops
Allows driver to reopen and edit/re-send a stop after it has been completed.
Default Value: false
reopenCompletedOrders
Allows the driver to reopen and edit/re-send a order after it has been completed.
(reopenCompletedStops needs to be enabled)
Default Value: false
bottles
When enabled (true), will required a driver to tap yes/no button to indicate if bottles were picked up at the stop.
Default Value: false
allowCompletionOfStopWithIncompleteOrders
Allows driver to fully complete a stop even if all order have not been delivered. If driver selects "Done" with uncompleted order, the following message is displayed. (not recommended)
Default Value: false
barcodeScanning
Enables barcode scanner input in POD and allows the driver to scan an order number to find the stop or order, (screenshot)
This option requires the use of a third party barcode scanning application.
Default Value: false
autoCompleteStop
If enabled (true), the stop will be completed after the last order on the stop is completed. If disable, the driver will be presented a order summary screen that has open orders, the driver then needs to select "Done" to complete the stop and go back to the stop summary screen.
(We recommend that this value be set to true)falseNodes - Type "POD-Config"
doneLikeSign
If "reopenCompletedStops" is set to true, then when editing a completed stop all changes are resent when the driver selects "Done" and returns to the stop summary screen. If false, the driver needs to re-sign the stop or order to re-send the delivery information.
(if "reopenCompletedStops" is true, we recommend that this value be set to true)
Default Value: false
bottlesIndicatorPropertyPath
Set file object path for the bottles indicator. If you're using bottles features, please contact support before changing this value.
Default Value:
props.ordertype
bottlesIndicatorRegex
Regex string to search for bottles indicator. If you're using bottles features, please contact support before changing this value.
Default Value: B
barcodePostambleKeyCode
Controls what happens after a barcode is scanned ('13' is on enter key and will automatically execute the search)
Requires that barcodeScanning be set to true.
Default Value: 13
barcodeTypeForOrders
Controls the data type for orders searching. Valid values are double, int and string.
Requires that barcodeScanning be set to true.
Default Value:
double
barcodeRegexForOrders
Regex string to search for order numbers. Should only be changes when using a different order number schema. The standard SXe schema is order.suborder (12345.01 and 12345.02)
Requires that barcodeScanning be set to true.
Default Value:
(.*)-(.*)
CompletedNodeRouteRetentionMinutes
Number of minutes to retain completed stops/orders/etc. on the device. Once the value has been reached, all completed stop/order/etc. is removed from the device. By default, all completed stops and order will be removed after 24 hours.1440Integration SettingIsHighlightedReturnsEnabledCause stops with orders that have type "rm" to be flagged as a return. (see Enable Return Order Highlighting in Cyan POD for Infor for more info)falseIntegration SettingShowActualLineCountCount the physical number of lines for each order in the set file (lines must be included the set file). If false, POD will use the line count value instead of the physical line count.
Default Value: false
ShowActualPackageCount
Count the physical number of packages for each order in the set file (packages must be included the set file). If false, POD will use the package count value instead of the physical package count.
Default Value: false
UnassignedUser
User that will be assigned to stops if no other user is assigned to a set file or if auto-sign fails.
(see Creating Driver Accounts for Cyan POD for Infor) unassigned-%tenantname%Integration SettingIntegrationScheduleControls how often Cyan looks for set file on customers ftp site. By default this value is set to 10 minutes, we do not recommend setting this below 5 minutes. (0 0/10 * * * ? = 0 days, 0 hours, 10 minutes. If you want to check every 5 minutes set this to 0 0/5 * * * ?) Please contact support if any of these values need to be changed.
Default Value: 0 0/10 * * * ?
FtpConnectionSettings
FTP connection information. Please contact support if any of these values need to be changed.{ "login": "", "password": "", "port": 21, "host": "", "path": ".", "proxyEnabled": false, "proxyLogin": "", "proxyPassword": "", "proxyPort": 3128, "proxyType": 1, "proxy": "", "passive": true, "largeBuffers": false, "clearCommandChannel": false, "protocol": 3, "allowedSuite": 2147483647, "securityType": 0, "logLevel": 40}
FilePathPrefix
Adds a string prefix and photo or signature image file name to order nodes.
Example: FilePathPrefix is set to 'file:', the order note in SXe will look like this: Test note file:2020014-00.bmp file:OrderNum2020014-00-1.jpg
If FilePathPrefix is not configured the order note will look like this: Test note
(No default value)Integration Setting
Comments
0 comments
Please sign in to leave a comment.